#1
|
||||
|
||||
Edit symbol : "next" button (Done)
Example : you have a drawing with 30 parts all connected to a "balloon" mentioning the partnumber. The company has created those symbols to be added easy.
Then following case happens : nr 15 is wrong indicated and is not relevant. So what happens is that i need to change nr 16-30 => nr 15-29 (or change the position of the other balloons en reflines but in my opinion that is even more work.....) Problem : this has to happen by "Edit symbol" and (in this example) i have to recall that menu 15 times cause there is no "next" symbol......... So i ask a "next" button. Also because this is a problem which is common. The company doesn't use the bom features of OSD so that is no option here.
__________________
I use Cocreate Modeling 2008 (x64 edition) and Cocreate Drafting 2008 |
#2
|
||||
|
||||
Re: Edit symbol : "next" button
Quote:
__________________
|
#3
|
||||
|
||||
Re: Edit symbol : "next" button
Ouch.....
__________________
I use Cocreate Modeling 2008 (x64 edition) and Cocreate Drafting 2008 |
#4
|
||||
|
||||
Re: Edit symbol : "next" button
So I'll mark this enhancement request as already done, is that OK with you?
Claus
__________________
CoCreate Modeling FAQ: http://www.clausbrod.de/CoCreateModeling/ |
#5
|
||||
|
||||
Re: Edit symbol : "next" button
yes no problem
__________________
I use Cocreate Modeling 2008 (x64 edition) and Cocreate Drafting 2008 |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | Search this Thread |
Display Modes | Rate This Thread |
|
|