#1
|
|||
|
|||
FE Analysis failed
Performing a FE Analysis in my project , this message:
Performing Analysis Analysis Falied Analysis job completed unsuccessfully Could not open file C:/temp/31DQ34~1/Job.f06 What i can do ? Last edited by andrea; 04-02-2009 at 04:42 AM. |
#2
|
|||
|
|||
Re: FEA Analysis failed
Hello Andrea,
I'm Vincent, CoCreate reseller in France. All my customers using FE Analysis with Modeling 16.00B have the same problems since April 1 2009. All was OK the 31 March 2009. Nothing has changed since. The problem is reproducible even after a removal and installation of FE Analysis. I first challenged my da_customize parameters, but it is not. I've contacted CoCreate support and now I wait... If you have some news please post ! |
#3
|
|||
|
|||
Re: FEA Analysis failed
same errors whit FE Analysis 15.50D and 16.00B.
have the same problems since April 1 2009. All was OK the 31 March 2009. Solution (TAN) 144429 will be updated accordingly (Subscription service available). Last edited by andrea; 04-02-2009 at 05:14 AM. |
#4
|
||||
|
||||
Re: FEA Analysis failed
We've been working on this problem. Other CAD packages are also affected. See also http://www.mscsoftware.com/support/?Q=132 .
Claus
__________________
CoCreate Modeling FAQ: http://www.clausbrod.de/CoCreateModeling/ Last edited by clausb; 04-02-2009 at 09:35 PM. |
#5
|
|||
|
|||
Re: FEA Analysis failed
hi, any prediction about the patch? months, weeks, days?
That could help to manage ours working plan. (and decide how/when finish currently FEM analysis) Thanks |
#6
|
||||
|
||||
Re: FEA Analysis failed
I hear there will be further communication through PTC support later this week.
__________________
CoCreate Modeling FAQ: http://www.clausbrod.de/CoCreateModeling/ |
#7
|
|||
|
|||
Re: FEA Analysis failed
Update - 8th April 2009
PTC R&D received patch version of Nastran software from MSC Software Corporation and implementation / builds are ongoing. Next Step: Final implementations of patches from MSC Software Corporation and verification to ensure proper implementation. First verifications have been performed at R&D and Technical Support for verification of patches. PTC R&D plans to release the patch within the very next days. Additional information will be provided from Technical Support. |
#8
|
|||
|
|||
Re: FEA Analysis failed
patch is out:
Update - 9th April 2009 Final tests from R&D and Technical Support have successfully been performed Technical Support finished to upload the patch files to Download area including description. http://www.ptc.com/appserver/cs/software_update/swupdate.jsp See CoCreate Modeling download page and CoCreate Modeling Finite Element Analysis Patches Patches are available for CoCreate Modeling 2006 (14.00, 14.50), CoCreate Modeling 2007 (15.00, 15.50) and CoCreate Modeling 2008 (16.00) It is required to download specific patches for each CoCreate Modeling Version and architecture (32bit / 64bit) |
#9
|
|||
|
|||
Re: FEA Analysis failed
it's possible link share for download here ??
|
#10
|
||||
|
||||
Re: FEA Analysis failed
AFAIK, a support account is required for downloads.
Claus
__________________
CoCreate Modeling FAQ: http://www.clausbrod.de/CoCreateModeling/ |
#11
|
|||
|
|||
Re: FEA Analysis failed
so if I cant a support account how do I get the patch?
|
#12
|
||||
|
||||
Re: FEA Analysis failed
Your company has a valid support contract with CoCreate.
You should be able to create a PTC support account and then upgrade it so you can download this patch. To upgrade your support account, you will need your SCN and your Customer Number. Contact PTC customer care at (877) 725-4782 if you do not have these numbers, or you cannot find someone in your company who already has this information. |
#13
|
||||
|
||||
Re: FEA Analysis failed
For those without a support contract, please get in touch with your local PTC CoCreate sales representative or your local partner contact to request the files needed to patch your FE Analysis installation.
Claus
__________________
CoCreate Modeling FAQ: http://www.clausbrod.de/CoCreateModeling/ |
#14
|
|||
|
|||
Re: FEA Analysis failed
help me !!!
can you post me the patch of the FEA Analysis error? Thank you |
#15
|
||||
|
||||
Re: FEA Analysis failed
See above - please get in touch with your local PTC CoCreate sales representative or your local partner contact to request the files needed to patch your FE Analysis installation.
__________________
CoCreate Modeling FAQ: http://www.clausbrod.de/CoCreateModeling/ |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | Search this Thread |
Display Modes | Rate This Thread |
|
|