#1
|
|||
|
|||
Reference line for BOM Flag
Hi all,
is possible to create bom flags whit poligonal reference line during the position in Annotation? (see the attached immage). Actualy for all the flags I have to delete the original reference line and recreate one by one. I spend realy a lot of time for this operation... Any macro or workaround exist? Thanks a lot. Best regards. |
#2
|
||||
|
||||
Re: Reference line for BOM Flag
as far as I know: no there's no possibility.
Your are selecting the part (geo) and placing the flag. Make 2 points. Will mean: straight line. There might be other BOM tools arround. Somewhere I saw one placing all the flags in a line (e.g. at the top of the view). But I ran not remember how the automatic placement of the reference lines did look like.
__________________
|
#3
|
|||
|
|||
Re: Reference line for BOM Flag
I'am working on the bomreference module. The numbers wil be aligned to the former number. Only I was not yet succesful to integrate the refline with more points. The refline can be replaced with the old leader_line.
[clausb: Attachment deleted due to copyright infringement] Last edited by clausb; 01-07-2008 at 10:42 AM. |
#4
|
||||
|
||||
Re: Reference line for BOM Flag
Henk,
I was informed (and have verified) that the attachment in your previous posting contains confidential code under CoCreate copyright. I have deleted the attachment to avoid legal problems. You may also need to delete the code from your own repositories to avoid the copyright issue. Claus
__________________
CoCreate Modeling FAQ: http://www.clausbrod.de/CoCreateModeling/ |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|